Manual browser: videoctl(1)

Section:
Page:
VIDEOCTL(1) General Commands Manual VIDEOCTL(1)

NAME

videoctlcontrol video device

SYNOPSIS

videoctl [-d device] -a

videoctl [-d device] name ...

videoctl [-d device] -w name=value ...

DESCRIPTION

The videoctl command displays or sets various video system driver variables. If a list of variables is present on the command line, then videoctl prints the current value of those variables for the specified device. If the -a flag is specified, all variables for the device are printed. If the -w flag is specified videoctl attempts to set the specified variables to the given values. The -d flag can be used to specify an alternate video device. If -d is not specified, /dev/video0 is used.

FILES

/dev/video0
video device

SEE ALSO

video(4)

HISTORY

The videoctl command first appeared in NetBSD 6.0.
December 26, 2010 NetBSD 7.0