Manual browser: elf_update(3)

Section:
Page:
ELF_UPDATE(3) Library Functions Manual ELF_UPDATE(3)

NAME

elf_updateupdate an ELF descriptor

LIBRARY

ELF Access Library (libelf, -lelf)

SYNOPSIS

#include <libelf.h>

off_t
elf_update(Elf *elf, Elf_Cmd cmd);

DESCRIPTION

Function elf_update() causes the library to recalculate the structure of an ELF object and optionally write out the image of the object to file.

Argument elf should reference a valid ELF descriptor.

Argument cmd can be one of the following values:

ELF_C_NULL
The library will recalculate structural information flagging modified structures with the ELF_F_DIRTY flag, but will not write data to the underlying file image.
ELF_C_WRITE
The library will recalculate structural information and will also write the new image to the underlying file. The ELF descriptor referenced by argument elf should permit the underlying ELF object to be written or updated (see elf_begin(3)).

All pointers to Elf_Scn and Elf_Data descriptors associated with descriptor elf should be considered invalid after a call to elf_update().

Specifying Object Layout

The ELF Access Library (libelf, -lelf) supports two layout modes.
Library Layout
If the ELF_F_LAYOUT flag is not set on the ELF descriptor, the ELF library will lay out the ELF object according to the following scheme:
EHDR
The ELF executable header will be placed at the start of the object.
PHDR
If the ELF descriptor contains a program header table, it will be placed after the Executable Header.
Section Data
ELF section data, if any, will be placed next, keeping each section's alignment requirements in mind.
SHDR
The ELF section header table, if any, will be placed last.
Application Controlled Layout
The application can take full control of the layout of the ELF object by setting the ELF_F_LAYOUT flag on the ELF descriptor (see elf_flagelf(3)). In this case the library will lay out the ELF object using application-supplied information as below:

EHDR
The ELF executable header will be placed at the start of the object.
PHDR
The ELF program header table, if any, it will be placed at the offset specified in the e_phoff field of the ELF executable header.
Section Data
The data for each ELF section will be placed at the offset specified by the sh_offset field of the section's header. The size of the section will be taken from the sh_size field of the section header.
SHDR
The ELF section header table, if any, will be placed at the offset specified by the e_shoff field of the executable header.

Gaps in the coverage of the file's contents will be set to the fill value specified by elf_fill(3).

Application Supplied Information

The application needs to set the following fields in the data structures associated with the ELF descriptor prior to calling elf_update().
Executable Header
The fields of the ELF executable header that need to be set by the application are:

e_entry
To be set to the desired entry address for executables.
e_flags
To be set to the desired processor specific flags.
e_ident[EI_DATA]
Must be set to one of ELFDATA2LSB or ELFDATA2MSB.
e_ident[EI_OSABI]
To be set to the OS ABI desired. For example, for FreeBSD executables, this field should be set to ELFOSABI_FREEBSD.
e_machine
To be set to the desired machine architecture, one of the EM_* values in the header file <elfdefinitions.h>.
e_phoff
If the application is managing the object's layout, it must set this field to the file offset of the ELF program header table.
e_shoff
If the application is managing the object's layout, it must set this field to the file offset of the ELF section header table.
e_shstrndx
To be set to the index of the string table containing section names.
e_type
To be set to the type of the ELF object, one of the ET_* values in the header file <elfdefinitions.h>.
e_version
To be set to the desired version of the ELF object.
Program Header
All fields of the entries in the program header table need to be set by the application.
Section Header
The fields of ELF section headers that need to be set by the application are:

sh_addr
To be set to the memory address where the section should reside.
sh_addralign
If the application is managing the file layout, it must set this field to the desired alignment for the section's contents. This value must be a power of two and must be at least as large as the largest alignment needed by any Elf_Data descriptor associated with the section.
sh_entsize
To be set to the size of each entry, for sections containing fixed size elements, or set to zero for sections without fixed size elements. If the application is not managing file layout, it may leave this field as zero for those sections whose types are known to the library.
sh_flags
To be set to the desired section flags.
sh_info
To be set as described in elf(5).
sh_link
To be set as described in elf(5).
sh_name
To be set to the index of the section's name in the string table containing section names.
sh_offset
If the application is managing the file layout, it must set this field to the file offset of the section's contents.
sh_size
If the application is managing the file layout, it must set this field to the file size of the section's contents.
sh_type
To be set to the type of the section.
Section Data
The Elf_Data descriptors associated with each section specify its contents (see elf_getdata(3)). While all the fields in these descriptors are under application control, the following fields influence object layout:
d_align
To be set to the desired alignment, within the containing section, of the descriptor's data.
d_off
If the application is managing object layout, it must set this field to the file offset, within the section, at which the descriptor's data should be placed.
d_size
To be set to the size in bytes of the memory representation of the descriptor's data.

RETURN VALUES

Function elf_update() returns the total size of the file image if successful, or -1 if an error occurred.

ERRORS

This function may fail with the following errors:
[ELF_E_ARGUMENT]
Argument elf was null.
[ELF_E_ARGUMENT]
Argument cmd was not recognized.
[ELF_E_ARGUMENT]
The argument elf was not a descriptor for an ELF object.
[ELF_E_CLASS]
The e_ident[EI_CLASS] field of the executable header of argument elf did not match the class of the file.
[ELF_E_DATA]
An Elf_Data descriptor contained in argument elf specified an unsupported type.
[ELF_E_DATA]
An Elf_Data descriptor specified an alignment that was zero or was not a power of two.
[ELF_E_HEADER]
The ELF header in argument elf requested a different byte order from the byte order already associated with the file.
[ELF_E_IO]
An I/O error was encountered.
[ELF_E_LAYOUT]
An Elf_Data descriptor contained in argument elf specified an alignment incompatible with its containing section.
[ELF_E_LAYOUT]
Argument elf contained section descriptors that overlapped in extent.
[ELF_E_LAYOUT]
Argument elf contained section descriptors that were incorrectly aligned or were too small for their data.
[ELF_E_LAYOUT]
The flag ELF_F_LAYOUT was set on the Elf descriptor and the executable header overlapped with the program header table.
[ELF_E_LAYOUT]
The flag ELF_F_LAYOUT was set on the Elf descriptor and the program header table was placed at a misaligned file offset.
[ELF_E_LAYOUT]
The flag ELF_F_LAYOUT was set on the Elf descriptor and the section header table overlapped an extent mapped by a section descriptor.
[ELF_E_LAYOUT]
The ELF_F_LAYOUT flag was set on the Elf descriptor, and the d_offset field in an Elf_Data descriptor contained a value that was not a multiple of the descriptor's specified alignment.
[ELF_E_MODE]
An ELF_C_WRITE operation was requested with an ELF descriptor that was not opened for writing or updating.
[ELF_E_SECTION]
Argument elf contained a section with an unrecognized type.
[ELF_E_SECTION]
The section header at index SHN_UNDEF had an illegal section type.
[ELF_E_SEQUENCE]
An ELF_C_WRITE operation was requested after a prior call to elf_cntl(elf, ELF_C_FDDONE) disassociated the ELF descriptor elf from its underlying file.
[ELF_E_VERSION]
Argument elf had an unsupported version or contained an Elf_Data descriptor with an unsupported version.
August 14, 2011 NetBSD 7.0