Manual browser: iwi(4)

Section:
Page:
IWI(4) Kernel Interfaces Manual IWI(4)

NAME

iwiIntel PRO/Wireless 2200BG/2915ABG IEEE 802.11 driver

SYNOPSIS

iwi* at pci? dev ? function ?

DESCRIPTION

The iwi driver provides support for Intel(R) PRO/Wireless 2200BG and 2915ABG MiniPCI network adapters.

By default, the iwi driver configures the adapter for BSS operation (aka infrastructure mode). This mode requires the use of an access point.

For more information on configuring this device, see ifconfig(8).

The Intel firmware requires acceptance of the End User License Agreement. The full license text can be found in /libdata/firmware/if_iwi/LICENSE.ipw2200-fw. The license is agreed to by setting the sysctl variable hw.iwi.accept_eula to 1.

EXAMPLES

Join an existing BSS network (i.e.: connect to an access point):

ifconfig iwi0 inet 192.168.0.20 netmask 0xffffff00

Join a specific BSS network with network name “my_net”:

ifconfig iwi0 inet 192.168.0.20 netmask 0xffffff00 nwid my_net

Join a specific BSS network with 64 bits WEP encryption:

ifconfig iwi0 inet 192.168.0.20 netmask 0xffffff00 nwid my_net \ 
        nwkey 0x1234567890

Join a specific BSS network with 128bits WEP encryption:

ifconfig iwi0 inet 192.168.0.20 netmask 0xffffff00 nwid my_net \ 
        nwkey 0x01020304050607080910111213

DIAGNOSTICS

iwi%d: device timeout
The driver will reset the hardware. This should not happen.

AUTHORS

The iwi driver and this man page were written by Damien Bergamini <damien.bergamini@free.fr>.
February 5, 2009 NetBSD 7.0