Manual browser: siisata(4)

Section:
Page:
SIISATA(4) Kernel Interfaces Manual SIISATA(4)

NAME

siisataSilicon Image SATA-II controllers driver

SYNOPSIS

siisata* at pci? dev ? function ?
siisata* at cardbus? function ?

DESCRIPTION

The siisata driver supports the Silicon Image SteelVine family of SATA-II controllers, interfacing the hardware with the ata(4) and atapi(4) subsystems.

The following controllers are supported by the siisata driver:

Silicon Image SiI3124 4-port PCI/PCI-X
Silicon Image SiI3132 2-port PCI-Express x1
Silicon Image SiI3531 1-port PCI-Express x1

HISTORY

The siisata driver first appeared in NetBSD 5.0.

AUTHORS

The siisata driver was written by Jonathan A. Kollasch <jakllsch@kollasch.net>.

BUGS

SATA Native Command Queuing is not yet supported.
Device hot swapping is not yet supported.
Silicon Image's Software RAID is not yet supported by the
ataraid(4) driver. raid(4) can be used instead.
July 19, 2009 NetBSD 7.0