Manual browser: lvchange(8)

Section:
Page:
LVCHANGE(8) System Manager's Manual LVCHANGE(8)

NAME

lvchange - change attributes of a logical volume

SYNOPSIS

lvchange [--addtag Tag] [-A|--autobackup y|n] [-a|--available y|n|ey|en|ly|ln] [--alloc AllocationPolicy] [-C|--contiguous y|n] [-d|--debug] [--deltag Tag] [--resync] [-h|-?|--help] [--ignorelockingfailure] [--ignoremonitoring] [--monitor {y|n}] [-M|--persistent y|n] [--minor minor] [-P|--partial] [-p|--permission r|rw] [-r/--readahead ReadAheadSectors|auto|none] [--refresh] [-t|--test] [-v|--verbose] LogicalVolumePath [LogicalVolumePath...]

DESCRIPTION

lvchange allows you to change the attributes of a logical volume including making them known to the kernel ready for use.

OPTIONS

See lvm for common options.
-a, --available y|n|ey|en|ly|ln
Controls the availability of the logical volumes for use. Communicates with the kernel device-mapper driver via libdevmapper to activate (-ay) or deactivate (-an) the logical volumes.
If clustered locking is enabled, -aey will activate exclusively on one node and -aly will activate only on the local node. To deactivate only on the local node use -aln. Logical volumes with single-host snapshots are always activated exclusively because they can only be used on one node at once.
-C, --contiguous y|n
Tries to set or reset the contiguous allocation policy for logical volumes. It's only possible to change a non-contiguous logical volume's allocation policy to contiguous, if all of the allocated physical extents are already contiguous.
--resync
Forces the complete resynchronization of a mirror. In normal circumstances you should not need this option because synchronization happens automatically. Data is read from the primary mirror device and copied to the others, so this can take a considerable amount of time - and during this time you are without a complete redundant copy of your data.
--minor minor
Set the minor number.
--monitor y|n
Controls whether or not a mirrored logical volume is monitored by dmeventd, if it is installed. If a device used by a monitored mirror reports an I/O error, the failure is handled according to mirror_image_fault_policy and mirror_log_fault_policy set in lvm.conf.
--ignoremonitoring
Make no attempt to interact with dmeventd unless --monitor is specified. Do not use this if dmeventd is already monitoring a device.
-M, --persistent y|n
Set to y to make the minor number specified persistent.
-p, --permission r|rw
Change access permission to read-only or read/write.
-r, --readahead ReadAheadSectors|auto|none
Set read ahead sector count of this logical volume. For volume groups with metadata in lvm1 format, this must be a value between 2 and 120 sectors. The default value is "auto" which allows the kernel to choose a suitable value automatically. "None" is equivalent to specifying zero.
--refresh
If the logical volume is active, reload its metadata. This is not necessary in normal operation, but may be useful if something has gone wrong or if you're doing clustering manually without a clustered lock manager.

Examples

"lvchange -pr vg00/lvol1" changes the permission on volume lvol1 in volume group vg00 to be read-only.
 

SEE ALSO

lvm(8), lvcreate(8), vgchange(8)
LVM TOOLS 2.02.44-cvs (02-17-09) Sistina Software UK